![Randy Ayers Nascar Modeling Forums Forum Index](templates/subSilver/images/logo_phpBB.gif) |
Randy Ayers Nascar Modeling Forums
|
View previous topic :: View next topic |
Author |
Message |
country modeler
![](http://i.imgur.com/At9V9gq.jpg)
Joined: 27 Jan 2018 Posts: 106
|
Posted: Sun Feb 04, 2018 8:33 pm Post subject: How To: Making red or yellow wheel stripes...(Restored) |
|
|
This is copied and pasted from the web archive of the old board. It was originally posted by Mach2.
If you're right handed, hold the semi-gloss black wheel in your left hand with the wheel between thumb and index finger. Hold a small diameter handle with a #11 x-acto blade in it with the right hand. Obvious, I know but trust me here. If you look real close you'll see just inside the outer diameter of the wheel theres another angled ridge, like the outer diameter of the wheel. But it's inside the wheel, JUST inside the wheel. This is the ridge that the edge of the blade scrapes. Hold the wheel at a 45 deg angle with your left thumb and index finger and hold the x-acto handle in the right hand so the cutting edge of the blade is almost flat to the horizon. Lightly scrape that inner ridge right on it's edge. It takes some practice, but once you get it down it becomes quite easy. Once this is done, I use a red or yellow, sometimes orange, Sharpie to color this now white line, which is the white plastic that the semi-gloss black paint was scraped off with the #11 x-acto blade.
Here's a pic of the stock white wheel. I've highlighted the very outer circumference in red, and the ridge that gets shaved with the #11 x-acto blade just inside the outer wheel circumference in BLUE.
Here's one angle on how I do it.
Another angle;
Some more;
Here's how it looks when done, then take a red or yellow Sharpie to color the white plastic.
![](https://i.imgur.com/ccCoVaU.jpg) _________________ "I wasn't trying to wreck him, I just wanted to rattle his cage." |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
18degrees
![](http://i.imgur.com/bRHsgcNt.jpg)
Joined: 01 Feb 2018 Posts: 1023 Location: metro STL area, ILLINois
|
Posted: Tue Feb 06, 2018 8:06 am Post subject: |
|
|
This is an excellent tip and is easier than it seems. I tried it with a chromed wheel and it worked, i can only imagine how it will look with a white wheel. _________________ ON DECK/IN THE WORKS: too many started to list...
![](https://i.imgur.com/ObnnOKft.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
18degrees
![](http://i.imgur.com/bRHsgcNt.jpg)
Joined: 01 Feb 2018 Posts: 1023 Location: metro STL area, ILLINois
|
Posted: Wed Feb 21, 2018 10:53 am Post subject: |
|
|
your tip was awesome AND easy to do, pretty sure I will be doing this with all my wheels from now on!
![](https://i.imgur.com/nqaZZA6l.jpg) _________________ ON DECK/IN THE WORKS: too many started to list...
![](https://i.imgur.com/ObnnOKft.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
parkertillman
Joined: 02 May 2021 Posts: 16
|
Posted: Mon Jun 14, 2021 3:43 pm Post subject: |
|
|
Jumping back into the hobby after 20 years....this is the way to go. I used to spray paint red/yellow on some aluminum foil and just barely dip the rim in it. This is WAY better! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Dennis O Board Moderator
Joined: 28 Jan 2018 Posts: 886 Location: Louisville, Ky.
|
Posted: Mon Jun 14, 2021 4:52 pm Post subject: |
|
|
Welcome back to the hobby. _________________ Dennis
Artificial Intelligence is no match for Natural Stupidity....... |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|