View previous topic :: View next topic |
Author |
Message |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sun Jan 28, 2018 10:32 am Post subject: on the kitchen table V2.0... |
|
|
first attempt to print my own waterslides for a couple of custom/personalized pieces for the ungrateful offspring... _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:37 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Mon Jan 29, 2018 12:59 pm Post subject: |
|
|
giving the decals a chance to cure...
so...broke out an old build to update.
gonna fix the stance and double up the numbers... _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:56 pm; edited 2 times in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Mack
Joined: 28 Jan 2018 Posts: 732 Location: deep south
|
Posted: Mon Jan 29, 2018 1:58 pm Post subject: |
|
|
keep us posted on the decals. do i spy some Buddy Baker Charger graphics? looking good. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Mon Jan 29, 2018 5:53 pm Post subject: |
|
|
Mack wrote: | keep us posted on the decals. do i spy some Buddy Baker Charger graphics? looking good. |
naw...most of it is logos and stuff from the schools my ungrateful offspring attended.
just stuff i snagged off the web... and spindled... and mutilated...then printed. _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Mon Jan 29, 2018 11:19 pm Post subject: |
|
|
before:
after:
got it back together...doubled up the door numbers...redid the rolling stock to get a little bit better stance...
the roof number decal exploded when it released...the door numbers released into 4-5 pieces...somehow i got them together and they set up good.
(i will say...the decal mounting fluid that came with the decal paper i bought is some awesome stuff...i think that helped more than anything.) _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:56 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Wed Jan 31, 2018 6:53 pm Post subject: |
|
|
dug another early build out to re-do...
this will be the full smash...strip...paint...ect...
the white i originally used just didn't hold up and yellowed...
this will probably be a fantasy scheme car...i have a couple of ideas...just have to make sure i have the right decals... _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:55 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Fri Feb 02, 2018 11:24 pm Post subject: |
|
|
got the decals i made cut up and applied...
i definitely have to work on my scaling...but these are close enough. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:55 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Shunter
![](http://images51.fotki.com/v731/photos/6/424036/14342555/lrg3192kristensentom__1_2-vi.jpg)
Joined: 27 Jan 2018 Posts: 459
|
Posted: Sat Feb 03, 2018 3:23 pm Post subject: |
|
|
You have been busy and also good at juggling many jobs. Nice work. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Gary Davis
Joined: 02 Feb 2018 Posts: 242 Location: Tacoma,Washington
|
Posted: Sat Feb 10, 2018 12:33 pm Post subject: |
|
|
Man Scooter...I'm really liking your decal work. Great safe on those six's. Man...those last two builds you just did...they look great. _________________ Short Track racing....Ya gotta love it.
I've been a member since 2006 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sat Feb 10, 2018 8:38 pm Post subject: |
|
|
Gary Davis wrote: | Man Scooter...I'm really liking your decal work. Great safe on those six's. Man...those last two builds you just did...they look great. |
thank you sir... _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sat Feb 10, 2018 8:40 pm Post subject: |
|
|
Shunter wrote: | You have been busy and also good at juggling many jobs. Nice work. |
i try...the crazy weather don't help tho.
thank you... _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sat Feb 10, 2018 8:43 pm Post subject: |
|
|
got this piece in primer...
the chassis/interior color gives away where i am going with this one. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:54 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Mon Feb 12, 2018 10:42 pm Post subject: |
|
|
just pulled it outta the dryer...
tried a new gloss black...rusto lacquer from the Depot. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:54 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Thu Feb 15, 2018 3:33 pm Post subject: |
|
|
about to button up the chassis/interior... _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:54 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Gary Davis
Joined: 02 Feb 2018 Posts: 242 Location: Tacoma,Washington
|
Posted: Thu Feb 15, 2018 4:10 pm Post subject: |
|
|
That interior is really looking good Scooter. _________________ Short Track racing....Ya gotta love it.
I've been a member since 2006 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Thu Feb 15, 2018 4:28 pm Post subject: |
|
|
Gary Davis wrote: | That interior is really looking good Scooter. |
thanks Gary... _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Fri Feb 16, 2018 11:01 pm Post subject: |
|
|
yeah...should have used microscale instead of the acrylic spray...(they had a crease thru them...but i didn't think they would self destruct like this)
i guess i can forget about a career in pinstriping...
it would have gotten a brake cleaner h if i hadn't spent 4 hours on the topside last night... _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:52 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sun Feb 18, 2018 9:03 am Post subject: |
|
|
coming together...
there are decals from at least 5 different sheets on this mutt...(monogram...revell...powerslide...slixx...fred cady) _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:52 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Mon Feb 19, 2018 1:53 am Post subject: |
|
|
needs to be cleaned and polished...but its done.
![](https://s25.postimg.cc/bjhhya9f3/fantasy10.jpg) _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:52 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Mon Feb 19, 2018 8:50 pm Post subject: |
|
|
junk box Grand Prix...
yeah...it's a mess. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:51 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Wed Feb 21, 2018 2:40 pm Post subject: |
|
|
body work...typical monogram that's been sitting for who knows how long.
warped this and warped that...and i think the chassis is not for this body.
(shrugs) _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:51 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Thu Feb 22, 2018 8:22 pm Post subject: |
|
|
got a break in the rain...(if i wait for it to stop i will be waiting till sometime next month apparently...last check i was just north of 6 inches in the last two days)
shot a quick and dirty coat of SEM on the chassis...this is gonna be a display case queen so i'm not sweating the interior...
got the decals on the way from Mike's... _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:51 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sat Feb 24, 2018 2:03 pm Post subject: |
|
|
interior...
pulled the ignition package for another project...
that shifter will probably come out too...it's really close to the shifters they use in the cars today...have no idea what model it came from...found it in the bottom of my junk box. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:51 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sat Feb 24, 2018 11:54 pm Post subject: |
|
|
first coat of rusto gloss white...then 8 or so hours in the dryer.
gonna hit it again tomorrow...then give it a good 12 hour bake. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:50 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Tue Feb 27, 2018 8:38 pm Post subject: |
|
|
Grand Prix on the hoof...
pulled the Goodyear decals off an old Monogram sheet...even after cleaning and soaking they just aren't setting up right...got get some new stuff from Mike's. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:50 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Wed Feb 28, 2018 2:23 pm Post subject: |
|
|
getting decaled up...
Blue Ridge decals are sized different than the stuff shown on the real car...so i had to move things around to get it "close"...
the hood was a pain...would not take paint...had to sand it down back to primer and hit it with Mr. Surfacer 1500. finally got it to take a coat of paint. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:50 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Thu Mar 01, 2018 12:52 am Post subject: |
|
|
next project...late 90s GM car.
got a Monte body and some decals on the way. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:50 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sun Mar 04, 2018 9:18 pm Post subject: |
|
|
interior buttoned up...
dash turned out wonky...the decals just did not want to set up. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:50 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Wed Mar 07, 2018 11:56 pm Post subject: |
|
|
still waiting on the body to arrive for the interior above...
so...Camry nose job time. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:57 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Thu Mar 08, 2018 10:30 pm Post subject: |
|
|
slowly bringing the pieces together for the join... _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:49 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Thu Mar 08, 2018 10:50 pm Post subject: |
|
|
got this in today...glued and putty-ed up. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:49 pm; edited 3 times in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Fri Mar 09, 2018 9:49 pm Post subject: |
|
|
pieces joined up...
extended hood using piece of hood that came with the nose kit...
cleaned up and filled in the passenger side fender... _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:47 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sat Mar 10, 2018 9:13 pm Post subject: |
|
|
(disclaimer: this is the very first piece of resin i have worked with. also...i know the folks who made this available come here...and i want to say thank you for making it...and please don't think i am criticizing your work. i have a rough idea of what goes into making this stuff...you guys did a bang up job getting this out)
ok...
here is the nose job in a rough primer coat...
this is (roughly) the same nose on the SMH Camry resin body...
i have done some comparisons with pics on the web to get an idea of what to do to get the resin nose to match the 1:1 car.
first is the inlets on each side...they need to be filled in and shaped or maybe shaped plugs need to be installed. you can look on the promo pic from Motor Trend and see the inlets on the prototype have a lot of curves and angles...and are taller than wide...i'm still working on a plan to try to get my nose close.
(Motor Trend/Toyota)
they other thing is the top of the fenders...(this is addressed in the instruction sheet provided by SMH)...the tops on the resin kinda have that shape...but after you do the join and start sanding...this area will have to be built up and reshaped...
the area at the emblem is pretty close...but needs to be cleaned up and sharpened...
over all the piece is a good base to start with...and this stuff will apply to the Camry body as well...i'm happy with it.
if you guys have any questions i will try to answer them... _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:47 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ENGINE28HAZMAT
Joined: 11 Mar 2018 Posts: 39 Location: City of Champions
|
Posted: Sun Mar 11, 2018 9:43 am Post subject: |
|
|
Looks great. Stupid question, what did you use to join the resin nose to the plastic body? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sun Mar 11, 2018 9:55 am Post subject: |
|
|
ENGINE28HAZMAT wrote: | Looks great. Stupid question, what did you use to join the resin nose to the plastic body? |
Gorilla Super Glue (gel)...
quick set time...good shelf life...good bond. and the cap has an anti-clog thing built into it.
and thanks... _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Fri Mar 16, 2018 10:32 pm Post subject: |
|
|
other projects in the skunk works shop while i sort out the Camry...
the Camry nose job has gone from adding material and then to removing material...it's back burnered for now...waiting on squadron putty. _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:46 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Fri Mar 23, 2018 9:10 am Post subject: |
|
|
on the table...
last of the snappers...
that Harvick/Jimmy John's paint scheme has been one freaking thing after another...of course...i had it perfect...and just had to mess with it.
the other car is waiting on some stuff from Mike's... _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:46 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Mon Mar 26, 2018 3:13 pm Post subject: |
|
|
#24 project...
i really would like to do the 2016 car and save all the Monster era decals...
but...young Mr. Elliott wasn't old enough to have the Coors Light Pole Award decals on his car...and of course he had to win the first pole of the year in 2016 so i can't fudge it...i really don't want to dig out the printer just for those 21 means 21 decals. (shrugs...) _________________
![](https://i.imgur.com/2PCHQgW.jpg)
Last edited by scooter64 on Wed Apr 18, 2018 7:45 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sat Mar 31, 2018 5:21 pm Post subject: |
|
|
Freaky Fast is getting a brake fluid h...
also...starting on my first new glue kit...took me a couple of minutes to realize that they did not mold up the roll bar padding... _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Mon Apr 02, 2018 5:10 pm Post subject: |
|
|
well...
the snapper i was gonna use for the freaky fast car is no more.
i think the brake fluid ate it up. went to clean off the last little bit of paint and it just fell apart.
(a moment of silence...) _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Tue Apr 17, 2018 10:27 pm Post subject: |
|
|
still messing with the Camry nose car...some grinding...filling...sanding...rinse...repeat...
gonna shoot a coat of primer on it in a couple of days...and see how it looks.
also...got a Fusion glue kit slowly coming together... _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
randy ayers Board Moderator
![](http://image.ibb.co/iHgfuR/Snowman_avitar.jpg)
Joined: 28 Jan 2018 Posts: 209 Location: Mills River, NC
|
Posted: Wed Apr 18, 2018 9:50 am Post subject: |
|
|
Where are all of your pictures... I only see this one? _________________ Modeling Planes and Space, then Drag Racing, then NASCAR were my favorites over the years and lately back to planes and space!
WIP Skylab... as I see it if it had all gone as planned! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Olderndirt
Joined: 01 Feb 2018 Posts: 24
|
Posted: Wed Apr 18, 2018 11:50 am Post subject: |
|
|
Thanks Randy, I was thinking my senility had finally won the war. Same thing I am only seeing the last picture.
Olderndirt |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Wed Apr 18, 2018 7:40 pm Post subject: |
|
|
hey...what happened to all my pics...
i noticed this last night...
i just reuploaded the first one...using the same link...
guess i will have to restore them...one at a time...
i don't have a clue...must be something with my host...(i know they split off a section of...ahem...those kinds of pics...)
edit: the domain changed...that is why the pics disappeared.
edit...edit... should all be back... _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Mack
Joined: 28 Jan 2018 Posts: 732 Location: deep south
|
Posted: Wed Apr 18, 2018 8:09 pm Post subject: |
|
|
DUDE!!! you are a machine! I envy you. _________________ life is hard, it's harder when you're stupid. John Wayne |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Wed Apr 18, 2018 8:41 pm Post subject: |
|
|
Mack wrote: | DUDE!!! you are a machine! I envy you. |
i'm all jacked up on cold medication...
![Shocked](images/smiles/icon_eek.gif) _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
randy ayers Board Moderator
![](http://image.ibb.co/iHgfuR/Snowman_avitar.jpg)
Joined: 28 Jan 2018 Posts: 209 Location: Mills River, NC
|
Posted: Thu Apr 19, 2018 8:40 am Post subject: |
|
|
Glad to see them all back! It had been a while since I checked this thread!!! Absolutely Awesome and very, very !!! _________________ Modeling Planes and Space, then Drag Racing, then NASCAR were my favorites over the years and lately back to planes and space!
WIP Skylab... as I see it if it had all gone as planned! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sat Apr 21, 2018 9:19 pm Post subject: |
|
|
well...it kinda looks like it.
still real rough... _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scooter64
Joined: 27 Jan 2018 Posts: 301
|
Posted: Sat Apr 21, 2018 9:46 pm Post subject: |
|
|
added some tape/sharpie grills... _________________
![](https://i.imgur.com/2PCHQgW.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
socal76
Joined: 30 Jan 2018 Posts: 14
|
Posted: Fri Apr 27, 2018 12:12 am Post subject: |
|
|
OK, I have to ask because I had not seen it before, but where did you get the Camry nose? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|