View previous topic :: View next topic |
Author |
Message |
spotter23
Joined: 26 Feb 2018 Posts: 75
|
Posted: Thu Nov 16, 2023 11:01 pm Post subject: Jack Ingram Fairmont |
|
|
Jack Ingram Fairmont that he drove to victory at Daytona in the 1980 Late Model 300 event. Body is 3D printed, opened the hood and trunk, chassis is a modified AMT NASCAR kit, front bumper and grill were sectioned to add heigth to the front of the car, PPP wheels and tires, STS decals, Revell chrome on the bumpers and grill. Thanks for looking
IMG_E1080 by James Gregory, on Flickr
IMG_E1081 by James Gregory, on Flickr
IMG_E1079 by James Gregory, on Flickr
IMG_E1078 by James Gregory, on Flickr
IMG_E1077 by James Gregory, on Flickr
IMG_E1076 by James Gregory, on Flickr
IMG_E1075 by James Gregory, on Flickr
IMG_E1074 by James Gregory, on Flickr
IMG_E1143 by James Gregory, on Flickr |
|
Back to top |
|
|
TN Vols fan
Joined: 18 Jan 2022 Posts: 286 Location: Crossett, AR
|
Posted: Thu Nov 16, 2023 11:09 pm Post subject: |
|
|
Great work, beautiful car. Thanks for sharing this. _________________ "Many men fish all their lives without knowing it is not the fish they are after." Henry David Thoreau
"I am, Sir, a brother of the angle" quote from The Compleat Angler, lzzak Walton 1654 |
|
Back to top |
|
|
DaveVan
Joined: 27 Jan 2018 Posts: 1579
|
Posted: Fri Nov 17, 2023 7:13 am Post subject: |
|
|
I LIKE IT!!!! |
|
Back to top |
|
|
Dennis O Board Moderator
Joined: 28 Jan 2018 Posts: 881 Location: Louisville, Ky.
|
Posted: Fri Nov 17, 2023 7:14 am Post subject: |
|
|
_________________ Dennis
Artificial Intelligence is no match for Natural Stupidity....... |
|
Back to top |
|
|
MarkJ
Joined: 29 Jan 2018 Posts: 1306
|
Posted: Fri Nov 17, 2023 8:40 am Post subject: |
|
|
And another one, James. I had no idea that a Fairmont was ever used in competition. Great job on the 3d printed build. Usually these look very rough when they are attempted. Yours looks beautiful. What is Revell chrome? |
|
Back to top |
|
|
jh63fan
Joined: 10 Sep 2021 Posts: 362 Location: Tarheel State
|
Posted: Fri Nov 17, 2023 11:25 am Post subject: |
|
|
Revell Chrome is a new spray paint that is supposed to simulate chrome. At over $30 a can, I haven't been brave enough to try it |
|
Back to top |
|
|
spotter23
Joined: 26 Feb 2018 Posts: 75
|
Posted: Fri Nov 17, 2023 12:33 pm Post subject: |
|
|
The Revell chrome works well, I found some for $27, yes it’s pricey but it works. I usually give it 3weeks to dry due to it being very soft for a good while |
|
Back to top |
|
|
Crime Dog
Joined: 27 Jan 2018 Posts: 339
|
Posted: Fri Nov 17, 2023 3:20 pm Post subject: |
|
|
Nice, That color really pops too! Looks like I might have to find some of that Revell chrome. |
|
Back to top |
|
|
Henryjint
Joined: 28 Jan 2018 Posts: 1973 Location: NY State's Hudson Valley
|
Posted: Fri Nov 17, 2023 9:04 pm Post subject: |
|
|
VERY, VERY nicely done!!! _________________ Forum member since 10/25/2010 |
|
Back to top |
|
|
MarkJ
Joined: 29 Jan 2018 Posts: 1306
|
Posted: Sat Nov 18, 2023 8:53 am Post subject: |
|
|
James, check your private messages. |
|
Back to top |
|
|
Rattlecan Dan
Joined: 13 Sep 2023 Posts: 230
|
Posted: Sat Nov 18, 2023 11:05 pm Post subject: |
|
|
Very nice work. Beautiful job of replication. |
|
Back to top |
|
|
spotter23
Joined: 26 Feb 2018 Posts: 75
|
Posted: Thu Nov 23, 2023 10:14 pm Post subject: |
|
|
Thanks for all the positive comments |
|
Back to top |
|
|
George Andrews
Joined: 30 Jan 2018 Posts: 460
|
Posted: Sat Nov 25, 2023 5:11 pm Post subject: |
|
|
MarkJ wrote: | And another one, James. I had no idea that a Fairmont was ever used in competition. Great job on the 3d printed build. Usually these look very rough when they are attempted. Yours looks beautiful. What is Revell chrome? |
When the NASCAR Grand National Series mandated down-sized car bodies in 1981, the Ford Fairmont was not on the list of approved bodies, as The Powers That Be felt it just was not quite big enough, despite it sharing the same wheelbase and greenhouse as the approved 1981 Thunderbird & Mercury Cougar. ( Worth noting that NASCAR required full fenders that covered the top of the tires on Cup cars. ) The Fairmont did enjoy success in Late Model Sportsman and Winston West competition. |
|
Back to top |
|
|
Billy Kingsley
Joined: 29 Jan 2019 Posts: 108 Location: Hudson Valley NY
|
|
Back to top |
|
|
Matt T.
Joined: 03 Feb 2018 Posts: 114 Location: Albany, NY
|
Posted: Tue Nov 28, 2023 5:48 pm Post subject: |
|
|
Beautiful! I always thought the Fairmont made a great looking race car. Your build is stellar. |
|
Back to top |
|
|
Toys4Don
Joined: 31 Jan 2018 Posts: 226
|
Posted: Sun Dec 03, 2023 6:27 pm Post subject: |
|
|
Super good looking Fairmont. About as close to the real thing as possible!! |
|
Back to top |
|
|
|