Randy Ayers Nascar Modeling Forums Forum Index Randy Ayers Nascar Modeling Forums

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Junior Johnson Mystery Motor Impala

 
Post new topic   Reply to topic    Randy Ayers Nascar Modeling Forums Forum Index -> The Showroom
View previous topic :: View next topic  
Author Message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Wed Apr 14, 2021 2:32 pm    Post subject: Junior Johnson Mystery Motor Impala Reply with quote

This race car was built using a Revell kit. It is a rebuild from a previous project (see fab shop for the story)
PPP wheels and tires
JNJ decals provided significant grief. ..aarrgghh
Chassis was modified for long arm rear suspension (Monogram parts)
Scratchbuilding of other chassis/engine items: shocks, air inlet, headers and dumps, fuel filler.
Interior cage built from 2mm Evergreen rod
Scratch built safety belts with 26 gauge wire, thin sheet styrene and masking tape.
Paint: Vallejo white primer and off-white color coat and Future clear, all brush painted.
Tamiya smoke and flat varnish on bumpers to tone them down and make them look battle scarred.
Thank you for looking.

[url
[/url
[url
[/url
[url
[/url
[url
[/url
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
MarkJ



Joined: 29 Jan 2018
Posts: 1296

PostPosted: Wed Apr 14, 2021 3:55 pm    Post subject: Reply with quote

Wow, Pierre. Excellent build. Its amazing what you can do with a brush. That paint looks perfect. And the decals you were worried about look fresh as if you just bought them. Love the Mystery motor and you nailed the stance. She sits perfectly. And the interior came out awesome too. Dont see many Sixty's Nascar builds that look this good.
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Wed Apr 14, 2021 4:33 pm    Post subject: Reply with quote

MarkJ wrote:
Wow, Pierre. Excellent build. Its amazing what you can do with a brush. That paint looks perfect. And the decals you were worried about look fresh as if you just bought them. Love the Mystery motor and you nailed the stance. She sits perfectly. And the interior came out awesome too. Dont see many Sixty's Nascar builds that look this good.


Thank you sir, your comments are much appreciated. The more I build the more I realize that getting the stance right is what helps provide some realism.
I forgot to mention that I cut up the front fender wheel opening and I also cut up the top of the tires to allow a lower stance.
I think "aging" the bumpers also helped the look.
The last element was improving my photo set up.
Trust me it looks better in pictures than "in the flesh"
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
MarkJ



Joined: 29 Jan 2018
Posts: 1296

PostPosted: Wed Apr 14, 2021 5:15 pm    Post subject: Reply with quote

Pierre Rivard wrote:
MarkJ wrote:
Wow, Pierre. Excellent build. Its amazing what you can do with a brush. That paint looks perfect. And the decals you were worried about look fresh as if you just bought them. Love the Mystery motor and you nailed the stance. She sits perfectly. And the interior came out awesome too. Dont see many Sixty's Nascar builds that look this good.


Thank you sir, your comments are much appreciated. The more I build the more I realize that getting the stance right is what helps provide some realism.
I forgot to mention that I cut up the front fender wheel opening and I also cut up the top of the tires to allow a lower stance.
I think "aging" the bumpers also helped the look.
The last element was improving my photo set up.
Trust me it looks better in pictures than "in the flesh"


Yes, the chrome does have a more realistic look to it. You need to explain to me again what you put on the bumpers and grille and how you put it on.
Back to top
View user's profile Send private message
Tom Birky



Joined: 01 Feb 2018
Posts: 197
Location: Eastern Iowa

PostPosted: Wed Apr 14, 2021 6:33 pm    Post subject: Reply with quote

Wow! Well done Pierre. Just the right amount of detail. Great job!

Tom
Back to top
View user's profile Send private message
Bill J



Joined: 28 Jan 2018
Posts: 392

PostPosted: Wed Apr 14, 2021 6:50 pm    Post subject: Reply with quote

Perfect looking 63 Impala. All the right details and all came out great. Nice work Smile
Back to top
View user's profile Send private message
bigryan18



Joined: 29 Jan 2018
Posts: 189

PostPosted: Thu Apr 15, 2021 2:47 am    Post subject: Reply with quote

Nice looking ride...
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Thu Apr 15, 2021 6:23 am    Post subject: Reply with quote

MarkJ wrote:
Pierre Rivard wrote:
MarkJ wrote:
Wow, Pierre. Excellent build. Its amazing what you can do with a brush. That paint looks perfect. And the decals you were worried about look fresh as if you just bought them. Love the Mystery motor and you nailed the stance. She sits perfectly. And the interior came out awesome too. Dont see many Sixty's Nascar builds that look this good.


Thank you sir, your comments are much appreciated. The more I build the more I realize that getting the stance right is what helps provide some realism.
I forgot to mention that I cut up the front fender wheel opening and I also cut up the top of the tires to allow a lower stance.
I think "aging" the bumpers also helped the look.
The last element was improving my photo set up.
Trust me it looks better in pictures than "in the flesh"


Yes, the chrome does have a more realistic look to it. You need to explain to me again what you put on the bumpers and grille and how you put it on.


For chrome I find that darker and less shiny looks more realistic
Bumpers and grilles: I brush Tamiya Smoke X-19 which darkens and fills recesses for contrast.
I then add a layer of Future mixed with a bit of Tamiya flat base X-19 to achieve a semi gloss finish.
Painted chrome trim: I avoid silver paint and go for a darker color like Tamiya XF-56 metallic gray then clear over with future (no flat base)
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
Racer14



Joined: 13 Feb 2018
Posts: 282
Location: Rockford, IL

PostPosted: Thu Apr 15, 2021 7:36 am    Post subject: Reply with quote

Very nice build. Excellent attention to the details!
Back to top
View user's profile Send private message
sentsat71



Joined: 03 Feb 2018
Posts: 1237
Location: Fenton, IA

PostPosted: Thu Apr 15, 2021 9:27 am    Post subject: Reply with quote

WOW!!!

VERY NICELY DONE!!!!!

..applause ..applause ..applause ..applause
_________________
Ed. K
Back to top
View user's profile Send private message
Henryjint



Joined: 28 Jan 2018
Posts: 1957
Location: NY State's Hudson Valley

PostPosted: Thu Apr 15, 2021 4:00 pm    Post subject: Reply with quote

Very nicely done!!!!
_________________
Forum member since 10/25/2010
Back to top
View user's profile Send private message
MarkJ



Joined: 29 Jan 2018
Posts: 1296

PostPosted: Fri Apr 16, 2021 8:18 am    Post subject: Reply with quote

So, Pierre. What did you say you use around the windshield, back glass, roof belt, and drip mouldings? Looks really good.
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Fri Apr 16, 2021 12:42 pm    Post subject: Reply with quote

MarkJ wrote:
So, Pierre. What did you say you use around the windshield, back glass, roof belt, and drip mouldings? Looks really good.


I paint with Tamiya XF-56 metallic gray (darker than aluminium) after the base coat and clear over it with Future along with the rest of the body.
Just my own opinion but I find that a darker metallic tone looks more realistic.
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
MarkJ



Joined: 29 Jan 2018
Posts: 1296

PostPosted: Fri Apr 16, 2021 1:41 pm    Post subject: Reply with quote

Pierre Rivard wrote:
MarkJ wrote:
So, Pierre. What did you say you use around the windshield, back glass, roof belt, and drip mouldings? Looks really good.


I paint with Tamiya XF-56 metallic gray (darker than aluminium) after the base coat and clear over it with Future along with the rest of the body.
Just my own opinion but I find that a darker metallic tone looks more realistic.


Thanks, Pierre. I just wish I had a source for tamiya paints locally. I think Micro Mark might sell them. I'll check. You're right though , The chrome bare metal foil is really too bright for the trim they had on 60's window trim and really all the mouldings on the cars. They weren't really chrome, they were aluminum or maybe stainless steel. In other words you can't see a mirror image of yourself if you look at a windshield moulding on a 63 impala.
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Fri Apr 16, 2021 4:55 pm    Post subject: Reply with quote

MarkJ wrote:
Pierre Rivard wrote:
MarkJ wrote:
So, Pierre. What did you say you use around the windshield, back glass, roof belt, and drip mouldings? Looks really good.


I paint with Tamiya XF-56 metallic gray (darker than aluminium) after the base coat and clear over it with Future along with the rest of the body.
Just my own opinion but I find that a darker metallic tone looks more realistic.


Thanks, Pierre. I just wish I had a source for tamiya paints locally. I think Micro Mark might sell them. I'll check. You're right though , The chrome bare metal foil is really too bright for the trim they had on 60's window trim and really all the mouldings on the cars. They weren't really chrome, they were aluminum or maybe stainless steel. In other words you can't see a mirror image of yourself if you look at a windshield moulding on a 63 impala.


Mark, I had a doubt about this one and went back to my notes
Although I usually use Tamiya XF-56 for this vehicle I used Vallejo Duraluminium 77.702.
Same idea here, it is a darker shade vs the standard aluminium
Just be careful with it, it is thin (airbrush viscosity) but brushes well on small surfaces like trim.
Many other shades of Vallejo Metal Colors are available too.
Hope it offers you with a doable alternative.

https://acrylicosvallejo.com/en/category/hobby/metal-color-en/
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
MarkJ



Joined: 29 Jan 2018
Posts: 1296

PostPosted: Sat Apr 17, 2021 8:25 am    Post subject: Reply with quote

Pierre Rivard wrote:
MarkJ wrote:
Pierre Rivard wrote:
MarkJ wrote:
So, Pierre. What did you say you use around the windshield, back glass, roof belt, and drip mouldings? Looks really good.


I paint with Tamiya XF-56 metallic gray (darker than aluminium) after the base coat and clear over it with Future along with the rest of the body.
Just my own opinion but I find that a darker metallic tone looks more realistic.


Thanks, Pierre. I just wish I had a source for tamiya paints locally. I think Micro Mark might sell them. I'll check. You're right though , The chrome bare metal foil is really too bright for the trim they had on 60's window trim and really all the mouldings on the cars. They weren't really chrome, they were aluminum or maybe stainless steel. In other words you can't see a mirror image of yourself if you look at a windshield moulding on a 63 impala.


Mark, I had a doubt about this one and went back to my notes
Although I usually use Tamiya XF-56 for this vehicle I used Vallejo Duraluminium 77.702.
Same idea here, it is a darker shade vs the standard aluminium
Just be careful with it, it is thin (airbrush viscosity) but brushes well on small surfaces like trim.
Many other shades of Vallejo Metal Colors are available too.
Hope it offers you with a doable alternative.

https://acrylicosvallejo.com/en/category/hobby/metal-color-en/


Thanks, Pierre. I dont have the duraluminum but maybe I can darken regular vallejo aluminum a little with some vallejo steel. I'll play with it and see what I can come up with. The b.m.f. doesnt seem to work as well as it use to. And I really dont look forward to using it anymore.
Back to top
View user's profile Send private message
nolansims1



Joined: 14 Apr 2021
Posts: 14

PostPosted: Sat Apr 17, 2021 10:54 am    Post subject: Reply with quote

Excellent work!
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Sat Apr 17, 2021 5:34 pm    Post subject: Reply with quote

Thank you all for your kind feedback
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
Wakefan77



Joined: 22 Apr 2020
Posts: 140
Location: North Carolina

PostPosted: Wed Apr 21, 2021 8:55 pm    Post subject: Reply with quote

Helluva build my friend. Always look forward to your work.
_________________
<a><img></a>
Back to top
View user's profile Send private message
BW



Joined: 01 Feb 2018
Posts: 218
Location: Lick Creek, Alabama

PostPosted: Thu Apr 22, 2021 7:34 pm    Post subject: Reply with quote

Excellent work Pierre! Your attention to detail is inspiring. I could look at this build for hours! Incredible brush painting. Thanks for posting and keep'em comin'!
-Bobby
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Fri Apr 23, 2021 4:32 pm    Post subject: Reply with quote

BW wrote:
Excellent work Pierre! Your attention to detail is inspiring. I could look at this build for hours! Incredible brush painting. Thanks for posting and keep'em comin'!
-Bobby


Thank you Bobby, considering this started as a black and gold glue bomb, I'm satisfied with the result of this rebuild.
Pierre
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
hobbyguy



Joined: 30 Jan 2018
Posts: 15

PostPosted: Tue May 04, 2021 1:37 pm    Post subject: Reply with quote

Hi Pierre looks great what did you use for the heat matting on the floor thanks.
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Wed May 05, 2021 6:55 am    Post subject: Reply with quote

hobbyguy wrote:
Hi Pierre looks great what did you use for the heat matting on the floor thanks.


I used medical adhesive tape purchased at the drugstore, available in many sizes and a few colors in the first aid section. Got this tip from MarkJ.
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
Gary Davis



Joined: 02 Feb 2018
Posts: 242
Location: Tacoma,Washington

PostPosted: Tue Jun 08, 2021 12:51 pm    Post subject: Reply with quote

Now that came out GREAT ALL around Pierre! The sit on this car is spot on. It looks fast just sittin there.
_________________
Short Track racing....Ya gotta love it.

I've been a member since 2006
Back to top
View user's profile Send private message Send e-mail
hobbyguy



Joined: 30 Jan 2018
Posts: 15

PostPosted: Wed Jun 16, 2021 4:05 pm    Post subject: Reply with quote

Hi Pierre what did use for upper rear shock mounts.
thanks
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Thu Jun 17, 2021 8:21 am    Post subject: Reply with quote

hobbyguy wrote:
Hi Pierre what did use for upper rear shock mounts.
thanks


Darn, caught cheating again! Embarassed

Seriously, there is no room for mounting shocks to the underside of the floorpan so I faked a Holman Moody type setup with mounts on the upper side in the trunk, which can't be seen on this model.
So I just drilled 4 pass throughs in the pan above the axle. The shocks pass through the openings but are unatached on the other side. You just can't see it.
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
R.J.



Joined: 28 Jan 2018
Posts: 382

PostPosted: Fri Sep 17, 2021 9:22 pm    Post subject: Reply with quote

Nice build
_________________
Roanoke, VA.
Back to top
View user's profile Send private message
MarkJ



Joined: 29 Jan 2018
Posts: 1296

PostPosted: Sat Sep 18, 2021 7:29 am    Post subject: Reply with quote

I'm glad this popped back up again. Pierre, how many coats of white did you put on the model. I'm going to be color coating my latest build and wanted to know what a normal amount of coats would be of the actual paint. Thanks. Wish me luck on my first brush painted model.
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Sat Sep 18, 2021 10:36 am    Post subject: Reply with quote

MarkJ wrote:
I'm glad this popped back up again. Pierre, how many coats of white did you put on the model. I'm going to be color coating my latest build and wanted to know what a normal amount of coats would be of the actual paint. Thanks. Wish me luck on my first brush painted model.


Mark, I don't have the info recorded on my build notes but since this was over white primer I would say 2 or 3 coats thinned to milk like viscosity.
For one coat I usually use 8 drops paint, 8 drops medium thinner and 1 or 2 drops water.
Use a thin flat brush and load it lightly.
Too thinned paint is better than not enough because it gives you time to work the paint without worries of it "gelling" up on you.
Multiple thin coats is the way to go with Vallejo.
good luck!
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
MarkJ



Joined: 29 Jan 2018
Posts: 1296

PostPosted: Sat Sep 18, 2021 5:24 pm    Post subject: Reply with quote

Pierre Rivard wrote:
MarkJ wrote:
I'm glad this popped back up again. Pierre, how many coats of white did you put on the model. I'm going to be color coating my latest build and wanted to know what a normal amount of coats would be of the actual paint. Thanks. Wish me luck on my first brush painted model.


Mark, I don't have the info recorded on my build notes but since this was over white primer I would say 2 or 3 coats thinned to milk like viscosity.
For one coat I usually use 8 drops paint, 8 drops medium thinner and 1 or 2 drops water.
Use a thin flat brush and load it lightly.
Too thinned paint is better than not enough because it gives you time to work the paint without worries of it "gelling" up on you.
Multiple thin coats is the way to go with Vallejo.
good luck!


Thanks , Pierre. My only problem is to get the right shade of paint color I had to use 9 drops white with 1 drop color to get it light enough to match the color I need. So then would you recommend 10 drops thinner and 2 drops water? And I might have paint left over after each coat? Do you sand between coats, or is it necessary? Thanks for your reply.
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Sun Sep 19, 2021 7:01 am    Post subject: Reply with quote

MarkJ wrote:
Pierre Rivard wrote:
MarkJ wrote:
I'm glad this popped back up again. Pierre, how many coats of white did you put on the model. I'm going to be color coating my latest build and wanted to know what a normal amount of coats would be of the actual paint. Thanks. Wish me luck on my first brush painted model.


Mark, I don't have the info recorded on my build notes but since this was over white primer I would say 2 or 3 coats thinned to milk like viscosity.
For one coat I usually use 8 drops paint, 8 drops medium thinner and 1 or 2 drops water.
Use a thin flat brush and load it lightly.
Too thinned paint is better than not enough because it gives you time to work the paint without worries of it "gelling" up on you.
Multiple thin coats is the way to go with Vallejo.
good luck!


Thanks , Pierre. My only problem is to get the right shade of paint color I had to use 9 drops white with 1 drop color to get it light enough to match the color I need. So then would you recommend 10 drops thinner and 2 drops water? And I might have paint left over after each coat? Do you sand between coats, or is it necessary? Thanks for your reply.


Don't worry about leaving some leftover paint, just get your color mix as you want it to be. Just throw it away and start fresh for the next coat.
I usually match paint to thinner drop count and complete with water (1 or 2 drops usually) to achieve the viscosity I like.
I don't sand between coats but the primer has to be very smooth to start with.
Here's a pic of a body I did with 2 coats primer and 3 coats color. What appears to be brush marks is not. It's more like variations of grossness which goes away with clear coats.

[url[/url]
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
MarkJ



Joined: 29 Jan 2018
Posts: 1296

PostPosted: Sun Sep 19, 2021 7:31 am    Post subject: Reply with quote

Pierre Rivard wrote:
MarkJ wrote:
Pierre Rivard wrote:
MarkJ wrote:
I'm glad this popped back up again. Pierre, how many coats of white did you put on the model. I'm going to be color coating my latest build and wanted to know what a normal amount of coats would be of the actual paint. Thanks. Wish me luck on my first brush painted model.


Mark, I don't have the info recorded on my build notes but since this was over white primer I would say 2 or 3 coats thinned to milk like viscosity.
For one coat I usually use 8 drops paint, 8 drops medium thinner and 1 or 2 drops water.
Use a thin flat brush and load it lightly.
Too thinned paint is better than not enough because it gives you time to work the paint without worries of it "gelling" up on you.
Multiple thin coats is the way to go with Vallejo.
good luck!


Thanks , Pierre. My only problem is to get the right shade of paint color I had to use 9 drops white with 1 drop color to get it light enough to match the color I need. So then would you recommend 10 drops thinner and 2 drops water? And I might have paint left over after each coat? Do you sand between coats, or is it necessary? Thanks for your reply.


Don't worry about leaving some leftover paint, just get your color mix as you want it to be. Just throw it away and start fresh for the next coat.
I usually match paint to thinner drop count and complete with water (1 or 2 drops usually) to achieve the viscosity I like.
I don't sand between coats but the primer has to be very smooth to start with.
Here's a pic of a body I did with 2 coats primer and 3 coats color. What appears to be brush marks is not. It's more like variations of grossness which goes away with clear coats.

[url[/url]


Thanks again, Pierre. By the way, what do you use for your clear coats?
Back to top
View user's profile Send private message
jchrisf



Joined: 11 Jul 2018
Posts: 103

PostPosted: Sun Sep 19, 2021 8:47 am    Post subject: Reply with quote

Pierre Rivard wrote:

Don't worry about leaving some leftover paint, just get your color mix as you want it to be. Just throw it away and start fresh for the next coat.


That looks great Pierre. I wonder if you used a wet palette if you'd have to throw it away. The people who use them say they keep their paint on them for weeks without an issue.
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Sun Sep 19, 2021 10:15 am    Post subject: Reply with quote

jchrisf wrote:
Pierre Rivard wrote:

Don't worry about leaving some leftover paint, just get your color mix as you want it to be. Just throw it away and start fresh for the next coat.


That looks great Pierre. I wonder if you used a wet palette if you'd have to throw it away. The people who use them say they keep their paint on them for weeks without an issue.


I mix small quantities for one coat at a time and throw away the rest. I avoid the issues of adjusting viscosities. Fresh paint for every coat. A $2.28 bottle is good for many bodies so why the hassle dealing with viscosity issues of aging leftovers to save a few pennies?
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
Pierre Rivard



Joined: 25 Feb 2021
Posts: 378
Location: Montreal, Canada

PostPosted: Sun Sep 19, 2021 11:00 am    Post subject: Reply with quote

MarkJ,
I use Pledge Future for clear, brush painted of course
btw I am getting my stuff out and test painting a black body, starting with primer.
I will update results in the Brush Painter Society
_________________
"When you arrive at a fork in the road, take it" - Yogi Berra
Back to top
View user's profile Send private message
MarkJ



Joined: 29 Jan 2018
Posts: 1296

PostPosted: Sun Sep 19, 2021 12:24 pm    Post subject: Reply with quote

Pierre Rivard wrote:
MarkJ,
I use Pledge Future for clear, brush painted of course
btw I am getting my stuff out and test painting a black body, starting with primer.
I will update results in the Brush Painter Society


Sounds good . I'll be watching for it. Thanks again for all the info.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Randy Ayers Nascar Modeling Forums Forum Index -> The Showroom All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group