View previous topic :: View next topic |
Author |
Message |
Red96
Joined: 30 Dec 2020 Posts: 46 Location: Pacific Northwest
|
Posted: Mon Jan 25, 2021 6:25 pm Post subject: Firebottle label |
|
|
Does anyone have, or know which decal supplier, might have these Firebottle suppression system labels in 1/25 (or 1/24)?? Been hunting on the decal vendors' sites, but the pics of the sheets are so low-res, you cannot make out what's on the sheet exept for the bigger stuff.
Thank you,
96 |
|
Back to top |
|
|
18degrees
Joined: 01 Feb 2018 Posts: 1019 Location: metro STL area, ILLINois
|
Posted: Mon Jan 25, 2021 8:37 pm Post subject: |
|
|
I thought that Powerslide had that decal on one of their goodie sheets _________________ ON DECK/IN THE WORKS: too many started to list...
|
|
Back to top |
|
|
Mark A Jeffries
Joined: 06 Feb 2018 Posts: 19
|
Posted: Tue Jan 26, 2021 6:06 am Post subject: |
|
|
Slixx has a sheet |
|
Back to top |
|
|
Red96
Joined: 30 Dec 2020 Posts: 46 Location: Pacific Northwest
|
Posted: Tue Jan 26, 2021 12:26 pm Post subject: |
|
|
Thank you gentlemen. That narrows it down. |
|
Back to top |
|
|
Brandon Miller
Joined: 06 Jan 2020 Posts: 105
|
|
Back to top |
|
|
Red96
Joined: 30 Dec 2020 Posts: 46 Location: Pacific Northwest
|
Posted: Wed Jan 27, 2021 4:13 pm Post subject: |
|
|
Brandon Miller wrote: | https://www.mikesdecals.com/2013-nascar-goodies-powerslide-p-4089.html |
Thank you Brandon for pointing out the specific sheet. Most of those pictured on the seller's sites are pretty low res images, so it's impossible to tell what the smaller stuff is on any particular sheet, so that was super helpful!!
Now just waiting for that sheet to come back into stock. Bought another with extinguisher & NOS bottle labels - will see what's actually on it when it arrives. There were a few 'blurs' on it that just may be what I'm after.
I suppose the website hosts put some limits on what the decal mfg's can use for image file sizes, so their hands probably are tied somewhat preventing better quality images. Too bad considering the amount of effort these folks put into making the sheets crystal clear.
96 |
|
Back to top |
|
|
18degrees
Joined: 01 Feb 2018 Posts: 1019 Location: metro STL area, ILLINois
|
Posted: Wed Jan 27, 2021 9:59 pm Post subject: |
|
|
I just looked at some sheets that i have and the Powerslide sheet in question has “Safecraft” extinguishers labels. The sheet you want, if you want “Firebottle” specific labels, are on the early 2000s Slixx goodies sheets. The Slixx mini sheet “nitrous bottles, fire bottles and ignition boxes” also have the FireBottle labels.
I checked all these sheets in-hand, so there is no guessing on what the internet picture shows. _________________ ON DECK/IN THE WORKS: too many started to list...
|
|
Back to top |
|
|
Red96
Joined: 30 Dec 2020 Posts: 46 Location: Pacific Northwest
|
Posted: Thu Jan 28, 2021 11:07 am Post subject: |
|
|
18degrees wrote: | I just looked at some sheets that i have and the Powerslide sheet in question has “Safecraft” extinguishers labels. The sheet you want, if you want “Firebottle” specific labels, are on the early 2000s Slixx goodies sheets. The Slixx mini sheet “nitrous bottles, fire bottles and ignition boxes” also have the FireBottle labels.
I checked all these sheets in-hand, so there is no guessing on what the internet picture shows. |
Thank you 18Degrees! I've ordered that mini-sheet, so should have that decal covered now. Also found one on a sheet from the DE Oreo kit, but it's looking a bit yellowed and sad...
Thankful for the help from everyone.
96 |
|
Back to top |
|
|
|