View previous topic :: View next topic |
Author |
Message |
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Mon Nov 05, 2018 9:50 pm Post subject: 69 Boss 429 Talladega oil pan wet or dry sump? |
|
|
I Now understand what people mean when they say the polar lights Talladega and Cyclone kits are flawed. First off the front track is too narrow and those upper control arms look like lumps. The Boss 429 valve covers hit the roll bar tubing Big Time. I wasn't planning on getting into a lot of work on this kit, with all the flash I had to remove and the massive amount of body work needed. But neither kit oil pan seem to fit, and being since the old library is gone and the links to kit building tips either aren't there or don't cover this topic, what system of oiling was run on the 69 Boss 429? If it matters, and it might, I'm building the Leeroy Yarbrough Junior Johnson cyclone using an older set of decals and a current release Bobby Allison Cyclone kit. And yeah, it's molded in dark red! What I hoped for a nice easy out of the box build is anything but! Help! Knowing the innovator Junior Johnson was, does anybody had detail pictures of this exact car? If it's a dry-sump, any good pictures of the oil tank? Any interior door panel pictures? And because I have an older polar lights decal sheet I can't do a black hood using this sheet, did they run a white Hood car without the side windows anywhere? _________________ "And on the 8th day God created the Hemi!"
Last edited by Bobby The Cabdriver on Mon Nov 05, 2018 10:29 pm; edited 1 time in total |
|
Back to top |
|
|
Tom M. Board Moderator
Joined: 01 Feb 2018 Posts: 606
|
Posted: Mon Nov 05, 2018 10:06 pm Post subject: |
|
|
All the NASCAR Boss 429 engines were dry sump. The 427 engines were all wet sump in NASCAR, as far as I know. |
|
Back to top |
|
|
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Mon Nov 05, 2018 10:13 pm Post subject: 69 Boss 429 Talladega oil pan wet or dry sump? |
|
|
Okay Tom, who's got the pictures? And I'm sure you've built this kit before, what did you do to make it all fit together? I've got the body work and the tubular upper control arms covered, but I'm just a Mopar guy, remember? _________________ "And on the 8th day God created the Hemi!" |
|
Back to top |
|
|
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Tue Nov 06, 2018 12:40 am Post subject: 69 Boss 429 Talladega oil pan wet or dry sump? |
|
|
I found some great pictures on hotrod.com under the heading of "69 Torino Talladega Aero Warrior"...or something like that... wow, these things got a lot going on that front suspension.... _________________ "And on the 8th day God created the Hemi!" |
|
Back to top |
|
|
Barry
Joined: 23 Mar 2018 Posts: 33
|
Posted: Tue Nov 06, 2018 12:40 am Post subject: Boss 429 oil dry sumps |
|
|
Hi, Bobby. If you are having trouble building the Polar Lights Cyclone, may I suggest you look just above your posting for Matt McNally's guide to building the Polar Lights Ford. Just click on the link, and follow along as he does a step by step build on how to fix some of the problems of using the Boss 429 engine, and corrections for the exhaust pipes, exhaust dumps, roll bars,etc. This kit can be a bit of a pain, but I used his method when I did the Petty car, and everything worked out fine. Just take your time. Hope this helps, and good luck with the build.
Barry Kennedy
Ontario, Canada |
|
Back to top |
|
|
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Tue Nov 06, 2018 12:49 am Post subject: 69 Boss 429 Talladega oil pan wet or dry sump? |
|
|
Yeah I did try Matt's link and like somebody else before me, it forward me somewhere else and that site said it was not available. In the hot rod story that I found it says in the story that dr. Craft says the car was built in 1970. The biggest thing that I see in that story is that the center of the crossmember has been cut out. Is this correct for a 1969 Holman & Moody chassis? And the headers on this car in the magazine, which is a documented Junior Johnson car, are insane! I don't believe I've ever seen anything like this other than 1964 race Hemi headers with individual tubes running down past the oil pan to a collector by the transmission crossmember. All I wanted was a nice simple out of the box build! Too late! These polar light kits are unbelievably flawed and I would hate to be an inexperienced modeler who's used to putting together monogram NASCAR kits trying to get one of these things to look right. I've already expressed my absolute hatred of the Polar lights Dodge Charger and the MPC 16th scale lump it's based on elsewhere here on this forum so let's not go there. I have a lot of time invested in this cyclone already, might as well go all the way! _________________ "And on the 8th day God created the Hemi!" |
|
Back to top |
|
|
Henryjint
Joined: 28 Jan 2018 Posts: 1978 Location: NY State's Hudson Valley
|
Posted: Tue Nov 06, 2018 8:03 am Post subject: |
|
|
Bobby - did you try going here?...http://public.fotki.com/lannyhaas/how-tos/polar_lights_build_up/
Hope this helps. _________________ Forum member since 10/25/2010 |
|
Back to top |
|
|
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Tue Nov 06, 2018 4:03 pm Post subject: 69 Boss 429 Talladega oil pan wet or dry sump? |
|
|
A nice build to be sure, but too out of the box for me. _________________ "And on the 8th day God created the Hemi!" |
|
Back to top |
|
|
Bill J
Joined: 28 Jan 2018 Posts: 393
|
Posted: Tue Nov 06, 2018 4:20 pm Post subject: |
|
|
That Hot Rod article about the 69 Junior Johnson car does show the correct dry sump oil pan and all of the 68 and on Torinos and Cyclones used headers that looked like that. Space was limited and the car had to ride low. This style was used on the 427 FE, 396 FE and the Boss 429. The 429 had a different head end where it bolted to the engine.
Unfortunately, no one ever kitted any correct headers or dry sump pans for the Fords. Never saw a model hemi dry sump pan either, maybe in the 1/16 kits. |
|
Back to top |
|
|
Tom M. Board Moderator
Joined: 01 Feb 2018 Posts: 606
|
Posted: Tue Nov 06, 2018 7:43 pm Post subject: |
|
|
The center section of the crossmember was replaced by a piece that bolted in. I think the later fabricated snouts had that part of the crossmember welded in, there were about three different versions of that part. The entire Galaxie snout was narrowed 2" when repurposed for Fairlane/Torino use. |
|
Back to top |
|
|
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Wed Nov 07, 2018 3:35 am Post subject: 69 Boss 429 Talladega oil pan wet or dry sump? |
|
|
Thank you.You got me going in the right direction now, with the hot rod pictures and this info.I could still use some pictures of the oil tank and cooler. A long time ago, I spend some time studying the petty race Hemi in the lobby at Charlotte Motor Speedway, but I'm drawing a blank on the oil pan. I don't have a a dry-sump Mopar project going yet but how about some pictures of a Hemi dry sump pan, being since it was brought up. I really can't remember seeing pictures of a dry-sump NASCAR Hemi pan anywhere. _________________ "And on the 8th day God created the Hemi!" |
|
Back to top |
|
|
Bill J
Joined: 28 Jan 2018 Posts: 393
|
Posted: Wed Nov 07, 2018 12:30 pm Post subject: |
|
|
426 hemi dry sump pan
|
|
Back to top |
|
|
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Wed Nov 07, 2018 5:54 pm Post subject: 69 Boss 429 Talladega oil pan wet or dry sump? |
|
|
You rule! _________________ "And on the 8th day God created the Hemi!" |
|
Back to top |
|
|
Firefly
Joined: 28 Jan 2018 Posts: 813 Location: New Jersey
|
Posted: Wed Nov 07, 2018 8:25 pm Post subject: |
|
|
If you like those headers on the JJ/Lee Roy car, a similar set was in the AMT '70/'71 Cobra kit. Not easy or cheap to acquire. You might try scratchbuilding them. (something to pull you further down this rabbit hole)
_________________ Bill Jobson is my real name. |
|
Back to top |
|
|
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Wed Nov 07, 2018 9:03 pm Post subject: 69 Boss 429 Talladega oil pan wet or dry sump? |
|
|
Hey Dave Van! Does this tooling still exist? These old MPC and AMT kits with the simplified chassis and metal axles have more than a simple charm. They still have some of the most accurate body shapes, since most of them are based off of manufacturer approved promos and it's gotten to the point where I'm scared to buy any new Revell models because even with all the detail, they've got some real problems in simple things like Hood lines and wheel wells. I love these reissue kits and I could always kitbash something more accurate together on the chassis and engine side. The Revell Hemi Cuda is a huge disappointment to me. How is the Revell 70 Torino? And would round 2 be willing to do a run of the AMT 70 Torino if the tooling exists? I'm thinking David Pearson/ Holman Moody and Donnie Allison/ Hoss Ellington. Speaking of rare but somewhat less expensive, I think something could be done with the headers in the Johan Pro Stock Maverick/Comet and Cuda. They do pop up on eBay from time to time and they are very nice kits. In fact the Ford twins have both Cammer AND Boss engine options. I wish I still had mine. _________________ "And on the 8th day God created the Hemi!" |
|
Back to top |
|
|
darksidefan2
Joined: 10 Feb 2018 Posts: 11
|
Posted: Sat Nov 10, 2018 8:34 am Post subject: |
|
|
Those '70 Cobra headers look something like the ones in the AMT '66 Galaxie kit although those have a collector and not 4 separate tubes all the way. |
|
Back to top |
|
|
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Sat Nov 10, 2018 8:56 am Post subject: 69 Boss 429 Talladega oil pan wet or dry sump? |
|
|
The headers in the Johan Pro Stock cars have very long primary tubes that are molded in pairs and with patience and a little Heat I'm sure we could get there. I'm actually bidding on 2 glue bomb Sox & Martin cuda's on flea pay right now. I'll keep you guys posted. _________________ "And on the 8th day God created the Hemi!" |
|
Back to top |
|
|
Goodwrench3
Joined: 02 Jan 2019 Posts: 63
|
Posted: Wed Jan 02, 2019 8:51 pm Post subject: |
|
|
RE: "The Boss 429 valve covers hit the roll bar tubing Big Time. "
Is this a problem on the Mercury Cyclone kit too ? I'm just getting ready to start on one and now I'm wondering if I should just build it with the 427 ?
Thanks |
|
Back to top |
|
|
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Thu Jan 03, 2019 2:18 am Post subject: 69 Boss 429 Talladega oil pan wet or dry sump? |
|
|
It's worse than that. The entire front suspension starting with the crossmember is too far back. I did not attempt to build mine with the 427 and I did not assemble my 427 to test fit either. I needed the block to use in another project( block, heads and intake manifold don't match up in the MPC Malco Mustang reissue , no chassis work, thank God) that also had issues with the way things fit together. Something that may help you is if you go to hotrod.com and look up" Aero Warrior Leroy Yarborough Talladega" there's a bunch of pictures of the chassis.This is not an easy kit to make right. _________________ "And on the 8th day God created the Hemi!"
Last edited by Bobby The Cabdriver on Thu Jan 03, 2019 11:19 pm; edited 1 time in total |
|
Back to top |
|
|
"Fireball"
Joined: 09 Feb 2018 Posts: 202
|
Posted: Thu Jan 03, 2019 10:28 pm Post subject: |
|
|
Firefly wrote: | If you like those headers on the JJ/Lee Roy car, a similar set was in the AMT '70/'71 Cobra kit. Not easy or cheap to acquire. You might try scratchbuilding them. (something to pull you further down this rabbit hole)
|
These headers/collectors/dumps were only used on the 429ci FoMoCo cars, regardless of the body style, correct? I don't believe the molds exist for these headers anymore, according to urban legend. |
|
Back to top |
|
|
DustyMojave
Joined: 12 May 2018 Posts: 8
|
Posted: Sat Feb 16, 2019 5:12 am Post subject: |
|
|
Hey Bobby, I read this and another older thread about the Polar Lights Talladegas and Cyclones. A popular reference is to Matt Macnally's build that he detailed on his website some time ago. But that page of his seems to not be up anymore and he hasn't responded on this forum. I have a downloaded copy of his article and have put it together in a Word document. If I can figure out how to get it on here, I'm willing to share. Maybe it could even become inserted into the already existing dead-end-top-of-the-list sticky? |
|
Back to top |
|
|
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Sat Feb 16, 2019 11:03 am Post subject: Boss 429 |
|
|
Dusty, you and anybody else who has important threads of this nature needs to contact Bob Hanner or Dennis O and work on having them restored to The Forum, it is been a running discussion about how much some of this information has been missed, even yesterday it was being discussed on John 847's thread about Petty Road Runners. We all need to work together to get this forum back to where it used to be and unfortunately not only have we lost a lot of the information but we've lost a lot of the people who provided it, it is up to the surviving members to build the Forum back up. _________________ "And on the 8th day God created the Hemi!" |
|
Back to top |
|
|
joe b
Joined: 31 Jan 2018 Posts: 209 Location: New Jersey
|
Posted: Wed Feb 20, 2019 1:00 pm Post subject: |
|
|
Tom M. wrote: | All the NASCAR Boss 429 engines were dry sump. The 427 engines were all wet sump in NASCAR, as far as I know. |
refresh my memory please. what the difference between dry and wet sump ? the dry sump carries the oil in a rear tank?
joe |
|
Back to top |
|
|
Racer14
Joined: 13 Feb 2018 Posts: 282 Location: Rockford, IL
|
Posted: Wed Feb 20, 2019 2:34 pm Post subject: |
|
|
Joe B., The dry sump uses an external belt driven oil pump that scavenges the oil from the engine pan to a separate oil tank with internal deareator. The deareated solid oil is pulled back from the reservoir tank through the pump and is returned to the engine for lubrication and cooling. |
|
Back to top |
|
|
AdamtheWayne
Joined: 09 Jul 2018 Posts: 1182
|
Posted: Wed Feb 20, 2019 3:26 pm Post subject: |
|
|
Racer14 wrote: | Joe B., The dry sump uses an external belt driven oil pump that scavenges the oil from the engine pan to a separate oil tank with internal deareator. The deareated solid oil is pulled back from the reservoir tank through the pump and is returned to the engine for lubrication and cooling. | And for those of us still wondering what a wet sump is? I'm guessing that's the internal system most street vehicles have? _________________ "Dude, it's not Camelot... it's only a model." "Details man, I need details!!" |
|
Back to top |
|
|
spooker
Joined: 11 Feb 2018 Posts: 439
|
Posted: Wed Feb 20, 2019 4:57 pm Post subject: |
|
|
Wet sump stores all the non-circulating oil in the oil pan, wet sump pulls all the circulated oil out of the engine to a remote reservoir to cool (sometimes goes thru an actual cooler) and then pumps it back to the engine thru a filter, under pressure to the moving parts. Without the need for oil storage, the wet sump pan is much smaller, allowing the engine to be lowered for better handling.
Brian |
|
Back to top |
|
|
Bobby The Cabdriver
Joined: 19 Oct 2018 Posts: 388 Location: " Keep Austin Weird?"ugh...
|
Posted: Wed Feb 20, 2019 6:38 pm Post subject: Boss 429 |
|
|
There's two major reasons for using a dry sump system. First is it provides more consistent oil pressure for high RPM use and also is not affected by oil slapping in the oil pan. Ever beat on a car or truck like doing donuts or j-turns or just simply thrashing down a twisty Road and have your oil pressure light flash on for a heartbeat? That's because you uncovered the pickup in your oil pan with your aggressive driving. Yes you splashed oil around that much inside your pan that you uncovered the pickup. A dry Sump System also allows you the carry more oil and the more oil the better not just for cooling but for the cleanliness of the oil. The other advantage of it has to do with weight. If you're running a low profile dry-sump oil pan it allows you to lower the engine significantly which lowers your center of gravity which allows of course allows for better handling. It also allows you to have a auxiliary oil tank placed where you need need extra weight the most, in the case of oval track cars that would be behind the driver's seat in front of the left rear wheel. A win-win for the racer and all these years later, 50 years later, the same basic system with the same basic principle still used in NASCAR and throughout the world of Motorsport. I hope this helps you understand what that big tank is behind the seat and why your engine has such a small oil pan. _________________ "And on the 8th day God created the Hemi!" |
|
Back to top |
|
|
George Andrews
Joined: 30 Jan 2018 Posts: 460
|
Posted: Fri Feb 22, 2019 10:58 pm Post subject: |
|
|
The dry-sump oiling system also presents a Good News / Bad News when the engine goes BOOM. While there is less oil in the pan to drop onto the tires & track, often the entire dry sump system, including pumps & tank, has to be flushed or even replaced to avoid having any metal particles contaminate the new engine. |
|
Back to top |
|
|
joe b
Joined: 31 Jan 2018 Posts: 209 Location: New Jersey
|
Posted: Sat Feb 23, 2019 10:02 am Post subject: |
|
|
spooker wrote: | Wet sump stores all the non-circulating oil in the oil pan, wet sump pulls all the circulated oil out of the engine to a remote reservoir to cool (sometimes goes thru an actual cooler) and then pumps it back to the engine thru a filter, under pressure to the moving parts. Without the need for oil storage, the wet sump pan is much smaller, allowing the engine to be lowered for better handling.
Brian |
brian i think you mean the dry sump pan is smaller. the wet sump pan would be bigger since it has to hold all the oil and the pump i would think
joe |
|
Back to top |
|
|
joe b
Joined: 31 Jan 2018 Posts: 209 Location: New Jersey
|
Posted: Sat Feb 23, 2019 10:08 am Post subject: |
|
|
so when did nascar change over from the wet sump to dry? i made a lorenzen 65 galaxie a few years ago and used the wet sump system. i ran the lines from the side of the oil pan to a filter, to an oil cooler and back to the pan.
joe |
|
Back to top |
|
|
C5HM
Joined: 31 Jan 2018 Posts: 120
|
Posted: Sat Feb 23, 2019 1:40 pm Post subject: |
|
|
joe b wrote: | so when did nascar change over from the wet sump to dry? i made a lorenzen 65 galaxie a few years ago and used the wet sump system. i ran the lines from the side of the oil pan to a filter, to an oil cooler and back to the pan.
joe | Teams (rather than NASCAR) began using dry sumps in 1969. The first for sure was the Boss 429 engine. Hemi 426 engines prolly began to use dry sumps right around...and maybe at...the same time. Prior to 1969 (to include the H&M 1965 Galaxies) teams used wet sumps. I am not aware of any Fomoco teams that used the FE dry sump system on their 427s after the Boss motor was choked into uncompetitiveness (beginning in 1971). But that stuff was around from the GT40 programs, so some might have. Bobby Allison's Boss 302 H&M GA Mustang was a dry sump car in 1971. The first Matadors were dry sump engines in 72. I think the transition was a team by team basis. |
|
Back to top |
|
|
odcics2
Joined: 09 Feb 2018 Posts: 283
|
Posted: Sun Feb 24, 2019 12:28 pm Post subject: |
|
|
C5HM wrote: | joe b wrote: | so when did nascar change over from the wet sump to dry? i made a lorenzen 65 galaxie a few years ago and used the wet sump system. i ran the lines from the side of the oil pan to a filter, to an oil cooler and back to the pan.
joe | Teams (rather than NASCAR) began using dry sumps in 1969. The first for sure was the Boss 429 engine. Hemi 426 engines prolly began to use dry sumps right around...and maybe at...the same time. Prior to 1969 (to include the H&M 1965 Galaxies) teams used wet sumps. I am not aware of any Fomoco teams that used the FE dry sump system on their 427s after the Boss motor was choked into uncompetitiveness (beginning in 1971). But that stuff was around from the GT40 programs, so some might have. Bobby Allison's Boss 302 H&M GA Mustang was a dry sump car in 1971. The first Matadors were dry sump engines in 72. I think the transition was a team by team basis. |
To add to the timing question:
Charger 500 DC-93 first hit the track at the end of November, 1968, built with a dry sump crossmember. For the initial test, a wet sump pan was used and hung lower than the dry sump pan would have.
The complete dry sump set up was not yet available. Speedway cars built after DC-93 had the dry sump crossmember.
The pan rule was 5" from the track. A shallower pan allowed the engine to sit lower in the crossmember, and thus allowed a lower hood.
Low = fast.
The top Ford and MoPar factory teams had dry sump cars for the 69 Daytona 500 available to them. |
|
Back to top |
|
|
Goodwrench3
Joined: 02 Jan 2019 Posts: 63
|
Posted: Sun Feb 24, 2019 7:56 pm Post subject: |
|
|
Lower = faster
Ligher = quicker
|
|
Back to top |
|
|
|