Randy Ayers Nascar Modeling Forums

You can count me in for a set as well.

Pierre, if you can get this chrome paint it works great and you can brush it on. They are based out of Spain but I have tried it out and I am very happy with it so far.
https://www.greenstuffworld.c ...

Looks great. What are you using for your stand?

This came out of an old computer. I always tear them apart before tossing because there's so many hidden treasures to be found. I don't know which se ...

Wow, that is great looking build.

Really enjoy seeing your mustang builds.

Looks great Henrik.

great job, I have been following this build and it turned out great.

Just got notified that mine shipped today.

84 Ford Ranger manual everything as well with a moon roof. Rebuilt the carb on a hot summer day and it ended up catching fire. After putting it out with water and replacing the burned hoses and line i ...

Pace car will lead the most laps.... Yeah but, he'll never make it to the end of the race. Wink

I did not know that Jeff Gordon drove a Ford in the Busch, now Xfinity series. I just had to add this to my collection.

https://i.postimg.cc/grpKMMWN/20200206-205033.jpghttps://i.postimg.cc/w7TQz73 ...

Well I asked about the color for this car sometime back and I finally got around to completing the build. I had some trouble with the decals but I am very happy with how it turned out.

https://i.po ...

So one of the Facebook groups I am on is having a 90's build off. I don't have many cars from the 90's but I had to pick this one up. I am not familiar with Joe Ruttman or this car but when I was litt ...

I sent Mike an email last week and I do believe he said there is another shipment that was on the way. He may have gotten them by now.

Well Mark, I just scored a Mustang body and was hoping you would be putting out some decals for it. Let me know when they are ready and you can count me in for a set of Wrangler Menards.

MarkJ, WOW very nice and great looking build.

I got my Dale Jr. test car all done. This car closely replicates the test car he drove at an open test session at IMS raceway in January 2017.

Revell snap kit built as a curb side build. Tamiya pri ...

Thank you Pnut615, I am wrapping up a few builds, two non-NASCAR, and will be starting on this hopefully real soon.

This is my attempt to build the test car Dale Jr drove at the open test at ISM raceway January 31st 2017. His first time behind the wheel after missing the last half ot the 2016 season.I did not have ...

Thank you Dave.

I am hoping the group here will be able to help me out with this. I have searched google and found one image of the First Contact Thunderbird. The image below is from the NASCAR Reddit. I was wonderin ...

Jose, great job as always and you got the ultimate stamp of approval. I am always amazed at your work.

This is some of what I do when not working on NASCAR models. This is a 54mm Romeo Models cast of a knight hospitaller. I don't like painting dark fabric due to the fact it is hard not to make it look ...

Thank you guys. I know I am a bit crazy for using my truck bed. I know it has not bit me yet but now I will be even more paranoid when I do it again. I normally try to keep it in contact with the tail ...

All finished you can find more photos in the showroom. Please feel free to click on the image to get a larger view.

https://i.postimg.cc/14NLT70y/20190825-155305.jpg

Well this build fought me all the way. I had to repaint it twice and bought three sets of decals since I have problems with the clear coat. I finally just cleared it with Future and I am going to call ...

I second what Scotty says. I have used them both ways. They are great decals, I have never been disappointed with MPR decals.

Nice work Fieldguy06. I really like the work you put into the seat.

Hi sebss, mprmprmpr here on the forums did the decals. There are a few builds on the forum of this car. MPR decals are great and laydown nice. You can find the decals over at https://www.mikesdecals.c ...

Painted and all ready for decals. I did fill in the hatch on the roof since that was not used on short tracks.

https://i.postimg.cc/4YNq2SfB/20190727-153742.jpghttps://i.postimg.cc/87K32msD/2019072 ...

Chassis is all done. Learned a considerable amount about how these Revell glue kits go together. The tires were decaled with powerslide decals. The body has been painted and a two part clear applied. ...

Well the chassis is almost done. I had some issues with fit but I got it all together. This is my first build of the Revell Glue kits so I am filling the notebook with notes on what I should do next. ...

Hi HurricaneDave3 are the images not showing up correctly? They should be clickable as well to take you the the image hosting site I use.

I have started putting the chassis together. I am somewhat pleased with how it is turning out. I have the decal placement off on a couple of things. I reworked the shifter to more like ones I have se ...

chuck sparnecht, two different sizes of silly winks foam sheets. I got mine at Hobby Lobby.

I have the engine all finished up next. The air cleaner is done as well and I will get a completed shot of that at a later date.

https://i.postimg.cc/D4ngnxQJ/20190722-212410.jpghttps://i.postimg.c ...

So I finished up the dash for the Harvick car. This was my first time using the Powerslide dash decals. My ignition wire loops are a little to tall. I went with using a brown wire instead of painting ...

Thank you for all the nice comments. I am still on the journey of turning out that one great build.

I finished this kit up the other day. Wetworks decals. Tamiya Bright Red over Tamiya Italian red. Tamiya Brilliant Blue over Tamiya Mica Blue. I used white primer. I did add a slight pearl coat over t ...

So I have started work on a 2018 Jimmy John's fusion. I have always wanted to make a more accurate cup seat. I was also challenged to build a HANS device, which I tried and decided to give the helmet ...

scooter64,

looks great.

great looking build. I did that car not to long ago. The decals are great.

This is another one I finished up. This one also had issues with paint. Powerslide decals but I opted to paint the red instead of using the decals. Gave a shot at building the air dam(not sure that is ...

Well the third of five Day's of Thunder cars done. This one fought me all the way. Three paint jobs because I could not get a good fluorescent pink. The left front fender broke and re-cracked when I w ...

My prayers are with you Mark. I hope the coming days start a more normalized trend for you and those close, well as normal as things can be as you move through these tragedies.

Well I finished this one up last week. You can see all the photos in the Showroom.

https://i.postimg.cc/DJHxmW22/20190224-144414.jpg

Well I finished my first diecast conversion. I just focused on the body since I never stripped or took apart a diecast. I used Tamiya Pure White and Light Green for the paint and MPR decals. The tail ...

AdamtheWayne, you made the bumper look REAL good, I just put some baremetal foil on it. The resin parts really added to the build.

I got a resin seat from AdamtheWayne who is on this forum. I believe he has them on ebay now.

Well with MPR's fantastic looking #72 Gas Monkey Camaro I am going to try my hand at my first Diecast conversion. I picked up a AJ Allmendinger #47 last November for a good price with the thought in m ...