Randy Ayers Nascar Modeling Forums

Does anyone have a set of Powerslide Benny Parsons Kings Row Lagunas decals they’d be willing to sell?

Looking for a set of power slide Kelly girl Laguna Decals.

Looking for a set of Yesterday’s decals to do Buddy Arrington 71-74 Plymouths.

Oh hell yes Bill that looks light years better!

wouldn't the 383 and 440 share the same intake manifold? I'm not sure.
A 383 was a B engine a 449 was an RB. 440 had a taller deck height. The intake would be wider.

This could work real well maybe! I would have bleed under for sure knowing my luck. How I do a Petty car is way different. I paint the base white and dayglo. Then I spray a thin coat of automotive 2k ...

The real car was 1970 Cadillac code 95. Cinnamon firemist poly. It was a metallic color. Best you can hope is to get close to the sheet color.

Man I’m sorry I forgot to get back to you. I do have one. Ok me your address was and I’ll send it to you.

I make spatter paint by painting the whole thing grey. Then I mist black and white over that from about 2 foot away. All this is done with rattle cans.

I think I have one let me look.

I did mine all black that’s what it looked like to me

I backdated a Bandit Resins 74 to a 73. I reshaped the bottom of the trunk lid and qtr extensions. Also reshaped the qtrs where the bumper meets them. I made a new rear bumper for it.

Looking for a set of Powerslide Friday Hassler Chevelle Decals and a set of Yesyerdays Dave Marcos Charger Daytona Decals.
Thanks
Tim

Keep in mind the Salvinos kits only go back to 74 bodies. 73 cars were waaay different in back. The qtr extensions trunk lid and rear bumper were all completely different from the 74 up cars.

[quote="spooker"]Not a Watts link, it's a panhard rod. Article calls it a "sway bar".
You are correct at first it looked like a watts link. But now I see it doesn’t pivot or have ...

Now that’s something I’ve never seen before. The watts link is in frt of the rear pumpkin. Never seen one that wasnt in back of the pumpkin before. Probably on account of the quick change rear.

Hmmm... Looks like the front end could use a bit of a section under the headlights and above the grille, and the peaks of the fenders need to be curved downward a little rather than run straight out. ...

I can't wait to get some of them they look great and this is a real missing link in the modeling of nascar race cars. I think some of you guy's want a kit that you put in a plastic bag squirt a little ...

These kits remind me of Polar Lights kits. They haven’t been finessed enough. The general shape is there but way too clunky. My biggest complaint is the roof is too thick above the side windows. The o ...

Notice in the Hemmings photo what it says on the qtr panel in frt of the tire. “Coming soon Pontiac GTOs

If hillbilly doesn't have a set I think I can help you out!
LMK
I haven’t heard anything from him. So I might take you up on your offer.

I’m looking for the Yesterday’s set that does the 73-74 Chevelles. The gold 1973 #50 Purolator car . The 74 was a red # 50

Looking for a set of Yesterday’s Aj Foyt Chevelle Decals.
Anybody willing to sell a set?

I love it. The best we could do back then. That’s a keeper for sure. Leave it alone looks fresh from the barn.

Like Dave said cars that Bobby built were short a cars with frt steer. Unlike the usual long arm rear steer chassis most were using.

That front end is so wrong it’s not even funny. Someone got waaay carried away with drooping that thing. Don’t look any her near the original pictures.

I've used screen from a reusable coffee filter basket.

I just bought some of that off ebay. It's 100 micron mesh. I DON'T EVEN KNOW WHAT THAT MEANS!

But it looked good and it was cheap, so w ...

Pm sent on smh Charger 500

I buy any AMT TBird kit I can find for $5.00. I always try to stock about 3-4 for my 70s builds.

Man Bill nice job on this one! In looking at the suspension pic John sent you that car had a watts link rather than the usual panhard bar. Cool I always thought a watts link was better geometry wise. ...

Ok everything forward of the hood except the headlight doors is different on a 73 than a 74-6. The header panel does not have as much peak. The grille is flatter and not as tall on a 73. The bumper is ...

Smh hobbies has a 73. It’s nice they had one about 5 years ago that wasn’t great but this one is nice.

A 77 Buick Century. Earnhardt faced one with the Monte Carlo roofline. Others used the roofline of the current Salvi os Cutlass kit. Quite a few were raced.

I’m looking for a rim for a MPC super stocker kit.

I want the correction kit more......

Yes please!

But did they do that on the kit?? I only have 2 built 73 kits....built back in the day so they are in storage...I need to dig them out.

The AMT body is pretty chunky to start with, so the differenc ...

The best way to make a 73 Chevelle is to put the amt 73 bumper and header panel on a MPC 73 Laguna. The body shape is light years better than the AMT body. A Slantnose Laguna body can also be used but ...

I managed to jamb an AMT TBird chassis under the SMH Montegoish body. Wasn’t easy. If you have a Bandit Resins body a TBird chassis stretched fits beautiful.

Stretch a AMT TBird chassis 1/8 inch reshape the rear wheelhousings and you then have a kinda correct chassis. I found the wheel openings to be tight. I opened all four up and re flared the frt slight ...

I'm after these
VTG VHTF 1:24 - 1:25 MODEL CAR Wheels
https://i.ebayimg.com/images/g/8bgAAOSwooRZkPLZ/s-l1600.jpg
Good luck! Very hard to find. They were super nice though.

When Junior built this car he used a Holman Moody frt clip and try arms in the rear correct? In the third picture posted it even looks to have a Holman moody dash. When Bobby drove his own car did it ...

Let me cover the postage at least.

What do you want for them Johnny. I bought from you before . We could just meet up again.
Tim

Looking for a set of the Buick rally wheels that came in the modified stocker kit.

Thanks Tim

Look how they built their frame around the stock GM rails on the midsection . I think the rules still said a factory frame had to be in place.

Looking for Yesterdays Tiny Lund Daytona sheet. Also AJ Foyt 73 Chevelle sheet.

Pm sent